Pages

Thursday, September 2, 2010

Deuce Is Wild





By Brian McGurk
Photography by Henry Z. De Kuyper

Joel Arceo's '04 S2000
"I won't mod it." "It's just a daily." If either of these sounds remotely familiar, you're not alone. Most all of us have been, or will be, in that very same predicament at some point. The pressure that mounts as you envision turning a simple "A to B" vehicle into a new tinker toy is mind boggling. Joel Arceo of Las Vegas, NV, is no different. "I had a turbo hatchback making 440whp on pump gas, and I was rebuilding it when I decided an S2000 would be a good daily driver." Las Vegas has a lot of sun and pretty ladies, so a drop top sports car seemed like the perfect stock daily for anyone. Apparently, Joel isn't just anyone.

"If you don't know me, I will basically mod anything that can be modded." Joel kept it simple...at first. His first mod was a Seibon carbon fiber hard top and an OEM front lip. After tripping over a local set of super rare staggered Work Equips (16x7 front, 17x9 rear) with some seriously aggressive offsets, Joel took them home asap. Following the acquisition of his new rollers, he got the deuce properly "stanced" with a set of D2 coil-overs. Not all that far from stock, but like so many others, Joel was just scratching the surface.

Now we know Joel's type, the guy with the only modified desk chair in the office, so don't hold this statement against him. "No offense to all the S2000 owners who think the car is fast, because this car in stock form is slow in my opinion. I wanted more power, so I ended up piecing my own turbo kit together." Joel didn't want to overshadow the 400+whp beast in his garage, so after collecting parts for a few weeks, his turbo setup gave the roadster the 340hp kick in the ass it needed. We all know where a mild 340hp build leads....straight up to 400hp, and far from half finished hatchback projects. "I wanted the S2000 to have 400whp, and needed parts, so I flipped little stuff off of the hatch like the cams, and it was all downhill until I just parted the whole hatch out for the S2000 build." Joel knew the deuce was good for 400+, but a person's butt dyno is only half accurate, so when he heard that a local dyno tuning day was fast approaching, he went into overdrive to ensure the convertible was ready to be strapped down and belt out some serious power. He upgraded the exhaust manifold, fuel management, and supporting mods to meet his power goal. As we all know, in Vegas, the house always wins, and Joel's turn to pay up came when the deuce was on the rollers. "I admit it, we rushed when we shouldn't have, and the result was bad. The car was sitting on the trailer in the parking lot getting the injectors installed along with all the engine fluids and I forgot to check the coolant, which caused the car to run dry." Needless to say, spinning the F22 to 8,500RPM with zero coolant in Vegas heat means broken parts, not to mention broken hearts, namely Joel's. "It was my fault. I towed the thing home and pulled everything off, got it running, and put the whole thing back to stock." He was done with the deuce as far as our purposes, and bought an S14 kouki, intent on leaving well enough alone.

Joel being Joel though, his stock and slow S deuce didn't stay that way for long. "I didn't want to give up on finishing the car since I never finished the hatch and didn't want to just give up half way through. So, I sold the Kouki and started with the S2000 once again. I had a goal of having the car finished by SEMA." With a goal in site, the cobwebs were dusted off and he and the UPS guy were on a first name basis within the week. His first delivery from the big brown truck was an Inline Pro T4 turbo manifold and custom wastegate to match the BorgWarner T4 S366 turbocharger. Spitting the spent gasses out of the turbo is a custom three-inch down pipe mated to a one-off un-muffled dump tube. Keeping the 2.2L from getting too thirsty, Joel opted for a Full Blown dual Walbro fuel pump hanger setup pushing the high octane stuff through a quartet of 1,000cc saturated injectors. It's hot in the desert, so a Precision 750hp intercooler and custom intercooler piping keep the charge temps low, and a Mishimoto radiator does the same duty for keeping the coolant frosty. A brand new Clutchmaster Stage 5 six-puck clutch was installed to transfer the power to the newly refinished Work Equips. "The wheels were rough and I had to take them apart completely to refinish everything and get them powdercoated. It was like the roof; I got them when I bought the car, but never finished them."

NRG supplied a steering wheel, hub, and quick release, along with their shift knob. A freshened up interior and fire breathing power plant don't deserve a body treated to months of desert sand exposure. A Shine automotive front bumper replaced the weathered OEM piece, and to freshen up the look, a full wrap from top to bottom in a stain blue was chosen. Weeks before SEMA, Joel returned to the scene of the crime; the dyno. The finally completed F22 produced a blistering 595whp. No longer in the "slow" category, it's safe to say that this deuce is wild.

McGurk, B. (2010). 2004 Honda S2000 - Deuce Is Wild. Honda Tuning. Retrieved from http://www.hondatuningmagazine.com/features/htup_1009_2004_honda_s2000/index.html

Wednesday, August 18, 2010

Crazy Train




By Brian McGurk
Photography by Rodrez

Chad Barber's 2001 Integra GS-R
Admit it, you wish you had a drag car. The high horsepower numbers, the smell of race fuel, the palpable tension when two cars rumble up to the Christmas tree. Any enthusiast worth their salt can at least appreciate a well put together track rat; although most probably salivate over single digit quarter mile monsters. Chad Barber out of Modesto, CA, is one of the lucky ones who figured out a way to turn his appreciation into not only a career, but a winning one at that. Chad started his legal racing career over ten years ago after falling for a fully built Comptech Integra. He recalls, "I used to do stereos for show cars, and at one show in particular, I saw a Comptech sponsored Integra and it was over. The very next day I went out and started piling up parts. That was just the beginning."

Chad's first Integra took him from one race to the next and from one coast to the other stacking wins along the way. The single car open trailer turned into a four car enclosed mobile garage, and the two man/one car team eventually grew into a fully stabled and amply staffed racing powerhouse. In short; Chad had made it. "It was nuts, I knew we were doing something right when ESPN came into the pits to talk to us. It was great!" Unfortunately Chad's racing dreams had the brakes put on when the economy took a definitive nose dive. "Some things happened and everything went away; the trailer, the 8,500-square-foot warehouse, everything. I found myself in Modesto with my three girls, no crew, garage, trailer, or anything. I had to start over. It really didn't bother me, and I felt like as long as I could race, I'd be fine," Chad reflects. Not long after Chad and his family settled into their new digs, he decided to start fresh with a new car. "I got a call from a buddy of mine and he'd come into an '01 Integra theft recovery. It was a rolling shell, and for $200 bucks it couldn't be beat-especially since we were going to tear it apart anyway and everyone likes seeing a newer chassis on the track." With the car secured, a crew was once again needed. Chad starting putting feelers out for a few good men...or women in this case. "I've got my kids now and can't spend all my time in the garage. I needed someone capable who I could count on; that's when I called Lisa Kubo. We'd met a few years back in the racing scene, and I knew she'd been thinking of throwing her hat into the FWD racing ring again, so I asked her if she wanted in on our team and she said 'Hell yeah!' Chad had never been a forced induction guy, but wanting to get Lisa into a car that could live up to her legacy meant he had to leave his all motor roots at the door and start learning all over again. "It was like starting all over from scratch. Thankfully, I've been blessed to have some of the most intelligent and capable people in the business assisting us to build the best car we can, from the engine builder, to some trusted consultants, only the best hands have touched this car."

With the Integra in his possession and a driver secured, Chad got to wrenching on his new track attacker's power plant. Under the hood is a fire breathing B18C1 taken to 1.9 liters and stuffed with the best go fast parts around; from the lightweight crank pushing a set of Arias pistons inside a Golden Eagle sleeved block, to the monstrous Bullseye power 372 turbocharger straddling a Portflow head packed with Supertech components. Essentially, no corners were cut. "The car hasn't been tuned yet, but we know similar setups have made upwards of 840hp. We'll be tweaking and tuning before this season and should make anywhere between there and 1,000hp. We need 8.60s to stay competitive so that's what we're shooting for." Helping get all 850-plus screaming ponies to the pavement are a set of Bogart racing Pro 4s; 13x8 up front, and 15x3.5 out back. Skunk2 Pro C coilovers up front and Penske running gear on the tail light end will help keep the car on the straight and narrow. Keepings Lisa safe and sound at 100-plus mph is accomplished with an NHRA-spec safety cage, and a MOMO bucket seat. Chad wanted this car to exceed everyone's expectations, so a simple "drag-ready" setup simply wouldn't do. "I never expected to get to this level of success, especially with such a small crew. But with Lisa on board I wanted this car to be really special, so instead of just shaving the rain gutters, Corey Shaw and I spent almost four weeks shaving the bay and everything in it; it came out awesome! I love the look, but I don't think I'll ever do it again." Chad finished off the body with a JCR three-piece fiberglass front end, a fresh silver paint job, and some advertising for all his sponsors. As you're reading this, the car should be at 100 percent, especially after the Rywire.com guys get their hands on it. In the meantime, Chad's working on setting up his and Lisa's debut for the car. The event is a grassroots, old school, cash prize shootout in the Sacramento area. "I've been working really hard on getting this event going. There won't be any huge corporate sponsors or million dollar cars. This is done by people like me and Lisa for the average enthusiast. They're the future of this sport and we need something like this."

Chad's got no overblown dreams of grandeur when it comes to his racing career, he's just happy to be here. "Lisa and I are kind of a two man/woman crew; we do most of everything. We have people who consistently help us out and we're super thankful for that, but it feels like more of an accomplishment when we do well since it's just us and no huge pressure from sponsors or anything. In my eyes, this is how it's supposed to be." Chad's been to the top of the pile and finds his new role as more of a team leader/planner a welcome change of pace. "I wish I could spend more time in the driver's seat, and when I get a chance, I do, but with my girls and my other responsibilities, I had to take a step back. That's why I'm trying to get these shootouts going, and keep my shop open. There's a whole group of guys who want to race and couldn't for years with the saturation of the field with the huge corporate sponsors; now it's going back to what it used to be, with guys wrenching in their garage." As far as the future goes, Chad's hoping for the best. "It's up to the racers where this sport goes. It went from huge money sponsors slugging it out, back to individuals doing "for racers-by racers" type events. The local small time guy buys parts from his local shop which eventually sponsors a racer, or an event; the racers keep this going and the more involved they are the better our industry gets. That's why I do what I do, because I love it."


McGurk, B. (2010). 2001 Acura Integra GS-R - Crazy Train. Honda Tuning Magazine. Retrieved from http://www.hondatuningmagazine.com/features/htup_1008_2001_acura_integra_gsr/index.html